manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Operating Instructions Manual, Page: 69 / 136

Share
Download
WÄRTSILÄ ELAC LAZ 5200 Operating Instructions Manual Download Page 69

R

efer to pr

otection

 notice ISO 16016

TH 52 614 8001 EN Rev. A 09/2018

Wärtsilä ELAC Nautik GmbH 

67 / 134

ELAC LAZ 5200 –  Operating Instructions

Operation

6.4.7

“SYSTEM SETUP” Menu

Fig. 6.27: “SYSTEM SETUP” Menu



Item

Designation

Description/

see section

Channel 1

Serves to configure the first receive chan-
nel.

6.5.11.1 "Configuration of a Channel"

Channel 2

Serves to configure the second receive 
channel.

6.5.11.1 "Configuration of a Channel"

Draft

Serves to set the draft.

6.5.11.6 "Setting the Draft"

Date and time

Serves to set date and time.

6.5.11.7 "Setting of the Date and Time"

Alert ID

Serves to set the alert ID of the device.

6.5.11.8 "Setting the Alarm ID"

Factory settings

Serves to reset all settings to the works 
settings.

6.5.11.9 "Restoring the Factory 

Settings"

Tab. 6.15: “SYSTEM SETUP” Menu

Summary of Contents for ELAC LAZ 5200









































































































































Reviews:

No comments