manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Operating Instructions Manual, Page: 73 / 136

Share
Download
WÄRTSILÄ ELAC LAZ 5200 Operating Instructions Manual Download Page 73

R

efer to pr

otection

 notice ISO 16016

TH 52 614 8001 EN Rev. A 09/2018

Wärtsilä ELAC Nautik GmbH 

71 / 134

ELAC LAZ 5200 –  Operating Instructions

Operation

6.5.4.2

Navigate in Menu

Proceed as follows to navigate in the menu:

1. Open the menu 

6.5.4.1.

2. Navigate to the desired menu item us-

ing the 

[CURSOR]

 keys

 (up or 

down).
–

The currently selected menu item 
is marked by a blue cursor

.

–

If the menu item has a sub-menu, 
the sub-menu will be displayed to 
the right of the currently selected 
menu.

3. To switch to the sub-menu, press the 

[ENTER]

 key

.

–

The cursor switches to a menu item 
of the sub-menu.

4. To return to the previous menu, press 

the 

[ESCAPE]

 key

.

Fig. 6.33: Navigation in the Menu

Fig. 6.34: Cursor in the Menu

ENTER

ESCAPE

CURSOR

Menu items that have a sub-menu are indicated by the symbol ">>" on the right-hand 
side.

Menu items marked with a lock symbol have to be unlocked before changes can be 
made in the corresponding sub-menu (

6.5.4.4 "Unlocking a Sub-menu"). Changes in 

these menus may only be made by qualified personnel.

Pressing the 

[ESCAPE]

 key in the "MAIN MENU" closes the menu

6.5.4.5.

Summary of Contents for ELAC LAZ 5200









































































































































Reviews:

No comments