manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Operating Instructions Manual, Page: 86 / 136

Share
Download
WÄRTSILÄ ELAC LAZ 5200 Operating Instructions Manual Download Page 86

ELAC LAZ 5200 – Operating Instructions

Operation

84 / 134

Wärtsilä ELAC Nautik GmbH 

TH 52 614 8001 EN Rev. A 09/2018

R

efer to pr

otection

 notice ISO 16016

6.5.7.3

Selection of the Display Colour

The following settings are available:

Selecting the display colour

Designation

Description

Day

---

Dusk

---

Night

---

B.Off

Backlight Off

Tab. 6.19: Display Colours

The default setting is "Day".

Proceed as follows to select the display co-
lour:

1. Open the menu 

6.5.4.

2. Select menu item 

MAIN MENU > SET-

TINGS > Color Palette

.

3. Press the 

[ENTER]

 key.

4. Select the desired setting with the 

[CURSOR]

 keys (up or down).

5. Press the 

[ENTER]

 key to confirm the 

selection.
–

The display colour of the screen is 
being set. This can take a few sec-
onds.

Fig. 6.51: Selecting the Display Colour

Summary of Contents for ELAC LAZ 5200









































































































































Reviews:

No comments