WAGO I/O-SYSTEM 750 Technical Description Download Page 48

Page: 48 / 192

48 • Fieldbus Coupler 750-337, 750-338

Hardware

WAGO-I/O-SYSTEM

750

CANopen

3.1.2.2 Variations

Item no.

Description

750-337

CANopen coupler with MCS Fieldbus connection

750-338

CANopen coupler with D-SUB Fieldbus connection

3.1.2.3 Device supply

The supply is made via terminal bocks with CAGE CLAMP® connection. The
device supply is intended both for the system and the field units.

750-307

24V

10nF

24V

10nF

24V

24V/0V

24V

2) 10nF/500V

1) 1M

ELECTRONICS

Bus

modules

FIELDBUS

INTERFACE

ELECTRONICS

FIELDBUS

INTERF

ACE

Fig. 3.1-2: Device Supply

g033701e

The integrated internal system supply module generates the necessary voltage
to supply the electronics and the connected I/O modules.

The fieldbus interface is supplied with electrically isolated voltage from the
internal system supply module.

Summary of Contents for I/O-SYSTEM 750

































































































































































































Search results

Summary of Contents for I/O-SYSTEM 750

Reviews:

Related manuals for I/O-SYSTEM 750

Brands by name

Popular brands

WAGO I/O-SYSTEM 750, Technical Description

Search results

Summary of Contents for I/O-SYSTEM 750

Reviews:

Related manuals for I/O-SYSTEM 750

Brands by name

Popular brands