Vodavi Starplus Triad 1, System Programming Manual

Page: 357 / 456

10-8 LCR Operation
3-Digit Area / Office Code Table
Programming Steps
1. Press the 3-DIGIT TABLE flexible button
(FLASH 75, Button #1)
. The
following message displays:
L = [0] for Non-Leading 1 (1 not dialed), [1] for Leading 1 (1 is dialed)
NNN = A rea/Office Code
RR = Route List Number 00-15
Y = [0] Do not go to 6-digit table, [1] Go to 6-digit table
PP = Number of digits expe cted to be dialed.
2. Press the HOLD button to save the entry. A confirmation tone is heard
and the display updates.
Description
Both Leading 1 and Non-Leading 1 tables include all area codes (NPAs),
and office codes (NXXs), from 000 to 999, including such numbers as 911,
411, etc. A complete entry into these tables include a route list table to be
used, if the 6-digit table is to be checked and the number of digits likely
to be dialed (Example: 7 or 10 digits). All local office codes must be
entered in this table even if they do not require long distance calling.
The number of digits to expect entry aids the system in identifying when
the last digit is dialed and to begin routing the call. This also helps to free
SLT DTMF receivers if SLT traffic in the system is heavy.
For international calls, use 00 as number of digits to expect. This causes
the system to wait five seconds (or inter-digit time-out) after user dials
last digit before the system accesses a CO Line and dials out.
3 D IG IT ROU T ING TA B LE
EN TE R L N N N R R Y PP HOL D