2-68
Networking Tables
By default, Port #1 (MPB RS-232C), Port #3 (RS-232) and Port #4 (RS-232)
baud rates are set for 9600.
Port #2 Baud Rate
Programming Steps
Press the PORT #2 flex button
(FLASH 15, Button #2)
to verify the baud
rate of the On-Board modem. The following message displays:
Description
PORT #2
--
On-Board 2400 Baud is standard on the
Triad 3
System, but
optional on
Triad 1/2
. By default, the On-Board modem baud rate is set
for 2400.
Networking Tables
Programming Steps
1. Press
FLASH
and dial
[16]
. The following message displays:
2. Press the desired button, make the necessary entry, and then press
HOLD after each entry to select a trunk group, station range, IP
address (if applicable), and system number:
[1] = Select Trunk Group (0-23)
[2]= Station Range START (100-9999)
[3] = Station Range END (100-9999)
[4] = IP Address
[22] = Page Up
[23] = Page Down
[24] = Select system number (1-16)
P ORT
BAUD
2
240 0
N ET WOR K IN G TAB LES
SEL ECT S YS N O
Summary of Contents for Starplus Triad 1
