UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
91
➢
HDMI signal embeds more signal information, such as audio and HDCP. Once some information
is missing, it will also affect the display. It may cause intermittent or loss of image. Under this
condition, user can try to set DVI output. The connection doesn’t need to change.
13.5. System Standby and Automatically Turn Off Output Signal
➢
[Options]
→
[Accessibility]
→
[Standby Time]
➢
If set [Standby Time] at 60, the system will get into Standby Mode after 60 seconds when no
input signal is detected. The output signals from UD100 will also be terminated at the same time.
If UD100 detects input signal again (hot plug signal), it will automatically output the signal.
➢
If the projectors can automatically turn off/on by detecting input signal, user can control signal
source to execute entire system on/off control.
13.6. Change Background Color
When no signal input, the system will show blue color background with [Power Saving Mode]
message on the screen. User can change background color to black with no text message on it
through [Options]
→
[Accessibility]
→
Black Screen]
→
[On]. Back ground color setting can be applied
to not full screen display such as aspect ratio change or multiple display image borders.
