UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
49
Corner wall application on curved screen
If user wants to implement Corner Wall function on curved screen, user can connect the signal to
one channel in UD100 to do warp alignment, then connect the output to the input port of the
channel for Corner Wall alignment. Then user can execute curve alignment and Corner Wall
adjustment at the same time.
Important notice on curved screen application
Refer to curve image alignment on wall corner, if the curve radius is larger than 1.5 meters, user
can use normal throw ratio (larger than 1.0) projector for the alignment. If the radius is less than 1.5
meters, we proprose to change the design with 90 degress corner wall. Then user can apply
[Corner Wall] alignment. We propose to use projector with throw ratio larger than 0.8:1 to get
better result. Throw ratio less than 0.5:1 may create alignment issue.
