UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
50
5.4. Geometry alignment via WebGui and PC Tool
(not yet available now)
➢
WebGui is embedded inside UD100. Once user connects UD100 with PC through Ethernet, user
can access WebGui and execute all operation similar to OSD menu through Virtual Keys and
OSD Menu. No PC or appropriate software tool is required.
➢
PC tool can be executed through PC. No software driver is required. Once user opens PC Tool
and connects with PC through Ethernet or USB, user can execute edge blending settings through
PC keyboard and mouse. After finish the setup, user can save the result to Box and no more PC
is required.
➢
User can backup system settings in PC and copy to other units.
➢
Firmware and MCU code update can be executed through PC Tool. User can control multiple
units at the same time through different IP address.
➢
Different PC tool version requires correspondance MCU code and firmware. Otherwise, it may
not work. Please contact us if you have any trouble.
