UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
2
5. Geometry Alignment
5.1. Select appropriate
Grid Pattern for geometry alignment………………………………………… 40
5.2.
Grid pattern pixel size selection…………………………………………………………………….
41
5.3.
Geometry alignment…………………………………………………………………………………
42
5.3.1.
Geometry alignment through remote controller…………………………………………….
43
5.3.2. Activate grid pat
tern……………………………………………………………………………
43
5.3.3.
[2x2] 4 corner geometry alignment…………………………………………………………… 44
5.3.4. [3x3], [5x3], [9x5], [17x9]
warp alignment……………………………………………………. 44
5.3.5.
Linearity grid line adjustment………………………………………………………………….
46
5.3.6. Corner [Wall]
geometry adjustment…………………………………………………………… 47
5.4. Geometry alignment via WebGui and PC Tool (not yet available now).
………………………. 50
6. [Video Wall]
settings……………………………………………………………………………………….
51
6.1.
[Zoom]: split the signal source……………………………………………………………………… 51
6.2. [Pan]:
assign image location………………………………………………………………………… 52
6.3.
[Overlap]: crop the right image for each projector………………………………………………… 52
6.4.
[Position]: shift image position without changing image size……………………………………. 53
7. [Edge Blend]
settings……………………………………………………………………………………… 54
7.1. [Edge] selection location and set edge blending value
………………………………………….
55
7.2.
[Shift]: shift image position and execute Edge Mask…………………………………………….
55
7.3.
[Gamma]: color correction in edge blending area……………………….……………………….
56
7.4. Black level uplift: [Offset] &
[Corner] adjustment…………………………………………………
59
7.4.1.
[Offset]…………………………………………………………………………………………… 59
7.4.2.
[Corner]………………………………………………………………………………………….
60
7.4.3.
Procedures for black level uplift………………………………………………………………
61
7.5. [Color]: Individual projector white balance and color
correction……………………………….
62
7.6.
Edge [Mask]………………………………………………………………………………………….
63
7.7. [Grid] (Determine grid pattern size)
……………………………………………………………….
64
7.8. Final image quality fine-tuning
………………………………………………………………….….
65
8. Example for 3 projector edge blending
……………...………………………………………………….
67
8.1. Get detailed edge blending information through VNS E
xcel Spread Sheet………………….
67
8.2.
Mark image location and install the projectors……………………………………………………
68
8.3.
System connection………………………………………………………………………………….
69
8.4.
Projector settings……………………………………………………………………………………
69
8.5.
GeoBox settings……………………………………………………………………………………… 70
8.6.
Geometry alignment…………………………………………………………………………………
70
8.7.
Video wall settings…………………………………………………………………………………… 72
8.8.
Edge blending setting………………………………………………………………………………… 73
8.9. Final image quality fine-
tuning……………………………………………………………………… 74
9. Save/Load system settings
……………………………………………………………………………….
74
10. Multiple unit applications
10.1.
System connection in multiple unit edge blending……………………………………………… 76
10.2.
Content overlap setting issue ……………………………………………………………………
77
10.3.
Convenient setting in multiple unit application…………………………………………………
79
10.3.1.
Setup by remote controller…………………………………………………………………
79
10.3.2.
Setup by Ethernet……………………………………………………………………………
79
11. WebGui and Gwarp3 PC tool (Not yet available now).
…………………………………………………. 80
