UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
4
Introduction
UD100 is designed for 4k projector warp, stacking and curved screen edge blending with the flexibility
to provide multiple processing modules to control from 1 to 4 projectors. UD101 is integrated with one
processing module to control one projector, UD102 for 2 projectors, UD103 for 3 projectors and UD104 for 4
projectors. One UD104 can execute 4 projector edge blending with projectors and signal source without any
additional equipment or splitter. Multiple UD100 can be cascaded for large scale display.
Each processing module has 4 input ports, 1 loop through port and 1 HDMI output port. All inputs
support up to 7680*2160 @30Hz, 5760*1200 @60Hz/4096*2160 @60Hz input resolution with 4:4:4 full color
sampling. DisplayPort input can support up to 7680*4320 @30Hz. Output supports up to 4096*2160 @60Hz.
It is integrated with 10-bit high end processor, motion adaptive de-interlace, low angle smooth algorithm,
3:2/2:2 pull-down and supports non-VESA standard input timings. Programmable EDID can optimize input
timing to get the best video result.
Advanced warp technology is embedded in UD100. User can use front panel keypads, IR controller,
USB, WebGui and Ethernet to perform edge blending and sophisticated geometry alignment up to 17x17
control points. Linearity Grid Line Adjustment for compete line movement and Corner Wall image adjustment
for mapping image at 90 degrees corner are new functions in geometry alignment. Separate R, G, B gamma
correction for edge blending region color fine-tune, individual color correction for each output and 9 regions
black level uplift to compensate light leakage in the projector are also standard functions in UD100. Users can
see real time geometry and color adjustment to get optimized result.
HDMI loop out supports daisy chain connection up to 8k/2k @30Hz / 4096x2160 @60Hz and allows
large display with multiple units cascaded. Video wall function is to crop and allocate source image for each
projector and set overlap pixels for edge blending. Complete curved edge blending can be achieved through
remote controller, USB and Ethernet without additional device except for signal source and projectors.
PIP (picture in picture), POP (side by side) and 3/4 split view MultiViewer are standard functions. PIP
image size is from 320*180 up to 1920*1200. In one UD104, user can display up to 16 different input contents
on the screen. Image 90/180/270 degrees rotation and flip are embedded in UD100. It provides flexible
system configuration.
UD100 is an ideal solution for simulation. It can connect with inputs from multiple PCs and combine
them into one seamless image. Unnecessary image can be masked out. It also provides flexible displays in
edge blending system. For a 3x projector edge blending system, user can configure as 1+1+1 independent
display, 1+2 (two projectors blended) and all-in-one (three projectors blended). User can also execute edge
blending with projector at portrait position without rotating source image to increase image height. It is a good
fit with laser projector without the limitation in installation angle.
Using UD100, users can replace high end projector with low-cost projector without lens shift, warp and
edge blending. It provides easy configuration, low entry barrier, cost effective, reliable and flexible solution.
