UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
61
➢
User can shift OSD position to avoid interruption in the border position adjustment while black level
uplift. Please press [Position] key on remote controller to shift OSD position.
➢
Below is to show color adjustment in black level uplift areas through above method. It can show
different colors with different shape of the borders. Maximum adjusting area is nine.
7.4.3. Procedures for black level uplift
Two projector horizontal edge blending as example.
➢
Turn off ambient light and apply a black background content on the screen. If no black background
content, user can disconnect input signal to get black image.
➢
Projector may have dynamic color adjustment function. In ideal case, please apply the actual
display content and select the location that will show clear light leakage image. It can make sure to
get the best result.
- Select CH-1 (LH projector), select center
block as showed in red circle.
- Press [OK] and adjust RED color to 150.
User will see red color enhancement.
- [Back] to [Corner] menu.
- Start from [Top Right] edge and adjust uplift
location to match light leakage.
- [Back] to [Offset]
→
Select center block
→
RED
→
adjust the value to 70
- Fine-tune R.G.B color to let LH projector
have similar color in overlap and non-
overlap area.
- Select CH-2 (RH projector), execute the
same procedures as CH-1 to finish black
level uplift procedures.
