UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
86
Note: please sav
e the setting through Remote controller “SAVE” hotkey or PC tool so that all
channels can be saved into the same Profile Index for easy recall. User can recall through
remote controller, RS232 or Ethernet. No projector installation or setting change is required.
12.4. Discrete content displayed in each projector
User can configure to show independent content in each projector. Below are the guidelines:
➢
Signal source selection: User can select HDMI-1/4/7/10as the input ports for all-in-one edge
blending and select HDMI-2/5/8/11 as the input source for four discrete displays.
➢
When execute discrete display, please reset [Video Wall] and Edge Blend] to default value.
➢
User need to use geometry alignment to let the images in projectors apart from each other.
➢
The Overlap region among adjacent projectors should not be too big. Otherwise, the final discrete
image will have more aspect ratio change due to draw the image inward. If necessary, user can
draw back top/bottom edges by Video Wall [Overlap] function to let final image has the same
aspect ratio as original.
➢
Save the final result into the same Profile Index in all channels for easy recall.
12.5. Image aspect ratio adjustment
User can change the aspect ratio of the image with black borders or to stretch the image in specific
direction to compensate the aspect ratio difference. The Maximum adjustment range is 1800 pixels in
each edge. User can adjust [Overlap] value under [Video Wall] menu to change the cropping area
and achieve aspect ratio change.
Case A: All-in-one
Case B: 2+1
Case C: 1+1+1
Case D: All-in-one + PIP
