UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
74
8.9. Final Image quality fine-tune
➢
If banding effect is visible in overlap area, please try below method:
✓
GeoBox [Gamma]: Please try to adjust Gamma value in [Transition] & [Gain] menu and adjust
✓
Projector: please try different projector settings
-
All projector should have the same setting.
-
To select color profile with gamma 2.2 will get the best result.
-
Check Display Mode: Usually Standard, sRGB modes will get better result.
-
Disable projector Brilliant color or Auto/Dynamic color adjustment.
➢
The video quality in overlap region is related to many factors. Please see more details
in Edge Blend section in this user guide.
9.
Save/Load
System
Settings
➢
After finishing system settings, user can save the setting via OSD menu through [Menu]
→
[Options]
→
[Setting]
→
[Profile]
→
[Save]
→
[Index 1-10]. It will take effect for one channel only.
User needs to save each channel separately.
➢
User can save the settings through [Save] hotkey on remote controller. It will take effect for all
channels at the same time. Maximum Index number is 1- 9 only.
➢
[Save] function is also available in WebGui and PC Tool. It will take effect for all channels up to 10
indexes.
➢
Please save all channels into the same Profile Index for easy Load back at the same time.
➢
Ten different display settings can be saved to [Profile]. The data stored in Profile include EDID
setting, input source, output resolution, color settings and all user customized settings.
➢
User can [Load] the settings through below methods:
✓
OSD menu: [Menu]
→
[Options]
→
[Setting]
→
[Profile]
→
[Load]
→
[Index 1-10]. It will take effect
for one channel only.
