UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
68
✓
Input the data in yellow column. User will get calculation result.
✓
Final image size for each projector: 2.500m*1.563m
✓
We reserve 6cm image height for geometry alignment and after service image position fine-tune.
User can use geometry alignment to draw the vertical height to the required dimension 1.5m. The
maximum image height adjustment can be up to 30% to 50%.
✓
Optimized content resolution: 3328*800 (This is the ideal resolution for the content and EDID).
✓
Installation distance: 3m-4.25m (based on throw ratio 1.2-1.7).
✓
The value in video wall Overlap setting:
▪
#1 Projector: RH edge: +197
▪
#2 Projector: LH edge=+98, RH edge=+98
▪
#3 Projector: LH edge: +197
✓
The final luminance is 819 Lux (Lum/M2). It will be enough for indoor environment.
8.2. Mark image location and install the projectors
➢
After
VNS Excel Spread Sheet calculation, user can understand the final image position
for each projector based on the image size for each projector and the overlap region
dimension. Please mark image position by paper adhesive tape on the screen. The
positions should include 4 corners of the image for each projector and horizontal
center line of the screen. Laser level is an ideal tool for marking center line, horizontal
and vertical image positions.
➢
Please install the projector just enough to cover the required area with minimum
keystone in both sides.
