UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
12
➢
UD100 can support non-VESA standard input timing once signal source can provide, such as
4096x2160, 3200x2400
…
➢
Only HDMI-1, HDMI-4, HDMI-7 & HDMI-10 input signals can be looped out. Loop out signal is
unprocessed source signal.
➢
For one content edge blending display (all-in-one), user needs to input signal to HDMI-1 /
HDMI-4 / HDMI-7 or HDMI-10, then loop out to next processing channel HDMI-1 / HDMI-4 /
HDMI-7 or HDMI-10 input port to let all channels be fed with the same signal source.
➢
User can reserve HDMI-1, HDMI-4, HDMI-7 & HDMI-10 for edge blending connection and the
other input ports can be served as inputs for discrete display, PIP/POP or MultiViewer
applications.
➢
If user wants to select different input sources for different content edge blending, user needs to
add one G901 at the front end to select different content for display.
➢
User can select different input port for each channel to display discrete content in each
projector.
➢
PIP/POP and MultiViewer function are integrated in each processing channel. User can select
any input signal in the same processing module as signal source. This function can only be
executed inside one channel unless user connects output signal among different channels.
2.2.2. Output resolution selection
➢
Output resolution should be set at the same native resolution of the projector to get the best
video quality. If user changes output resolution, geometry adjustment result will also be
changed.
➢
User needs to select output resolution in each processing channel separately. The output
resolution selection will apply to single channel.
➢
Output resolution supports up to 4096*2160/60Hz. User can select output resolution from
remote controller, front panel, WebGui or PC tool.
➢
Preset output resolution list: 1024x768
，
1280x720
，
1280x800
，
1280x1024
，
1360x768
，
1400x1050
，
1600x1200
，
1920x1080 (50/60Hz
），
1920*1200 (30/60)
，
3840x2160
(30/50/60)
，
4096x2160 (30/50)
。
All output default resolution is 60Hz, RGB 4:4:4 and
progressive.
➢
No specific connection sequence is required. The location for each projector can be determined
through Video Wall settings.
➢
User can select output resolution through remote controller, USB or Ethernet.
➢
User can access to [Image Properties]
→
[Output] OSD menu to select all preset output
resolution and select 8/10 bit deep color output.
➢
All output default resolution is 1080P 60Hz, RGB 4:4:4 and progressive.
➢
If the output refresh rate is not the same as input refresh rate. The frame lock function will be
disabled and it may cause not synchronization issue among output channels. If the input is
