UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
75
✓
Remote controller [Profile] hotkey: Press [Profile] hotkey, then select number keys (Index 1-9)
on the remote control (not through OSD direction keys) to [Load] user settings. It will Load the
settings for all channels at the same time.
✓
WebGui & PC Tool: user can access [System]
→
[Load] menu to recall the settings for all
channels through Ethernet or USB.
➢
When user power off the system, UD100 will save user setting without loss even the setting is not
saved into Profile Index, unless someone to change it.
➢
Under below conditions, the settings data inside Profile Index will be kept without missing:
✓
When system has been reset from OSD menu, it will take effect for one channel only and the
Profile data will not be deleted.
✓
Remote controller [Reset] hotkey will take effect for one channel and Profile data will be kept
without delete.
✓
When user update new Firmware, it will not affect Profile data.
✓
Only Reset from reset hole on back panel will erase Profile Data.
➢
Hotkeys for Profile [Save] and [Load] from remote controller and front panel keypad.
Press [Profile], then select number keys
to [Load] user settings. It will apply to all
channels at the same time.
Press [Save], then select
number key (1-9) to save
settings. The setting will
apply to all channels at the
same time.
Number keys
(1-9) for Profile
[Save] & [Load]
Press [Profile], then select [Index #] to
[Load] user settings. It will apply to all
channels at the same time.
Index # keys (1-5)
for Profile [Load]
