UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
55
7.1. [Edge]: select location and set edge blending value
➢
[Edge] is to select the edge for edge blend and set overlapped pixel number.
➢
User can execute edge blending at any edge. Max. edge blending edge is four.
➢
Maximum edge blend pixel in each edge is: H=1920, V=1200.
➢
Red & Green Color indicating lines will appear when set edge blending pixels.
➢
User needs to adjust the color indicating lines to match together (green to green, red to red). The
final overlap value is the same as actual overlap number (grid size * grid number).
7.2. [Shift]: shift edge blending position and execute Edge Mask
➢
[Shift] has two functions: one is to shift [Edge Blend] location and another function is to do [Edge
Mask] in not [Edge Blend] borders.
➢
When user selects the edge in Edge Blending area
, user can apply “+” value (0 to +500) to shift
the whole [Edge Blend] p
osition. If the value is “-“ (0 to -10), user can see color uplift in the edge of
the Edge Blending area. The purpose is for user to do color fine tune in edge blending border.
For 3 projector edge blending as example:
-
To set [Right Edge] for LH projector
-
To set both [Right Edge] & [Left Edge] for
center projector.
-
To set [Left Edge] for RH projector
[Edge Blend] hotkey
