UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
82
12. Advanced applications and settings
12.1. Multiple Wall Immersive display
User can use multiple projectors to execute Multiple Wall display with the images from different
projectors. Below is the example for a display with 3 walls and one floor to build one immersive
display.
a.
Assumption
✓
3 walls display: W1=2m, W2=5m, W3=3m
✓
Signal source: 3840x1200, GeoBox output resolution: 1920x1200
b.
Usually, 5000 Lum projector can cover 3-4 meters image width. Four projectors are required to
cover entire screen.
c.
The dimension of W1 is only 2.5m, it is possible using one projector to project onto W1 & W2.
User needs to use [Corner Wall] or the geometry alignment. Due to big geometry alignment and
off axle projection, the video quality will be lower. We suggest to meet the image edge at wall
corner to get the best video quality.
d.
In ideal condition, each projector should have the same projection size to get equal brightness.
For 2.5m image height, the image width should be 4m (16:10 aspect ratio).
✓
W1: one projector is enough
✓
W2: require two projectors with edge blending to cover the space
✓
W3: one projector is enough
✓
Floor: 1-2 projectors is required. (If use one projector, the image size is 4.8mx3m, the
brightness and resolution will be a little lower. The installation distance should be also
considered. Bigger image requires bigger installation distance.
W2=5m
W3=3m
W1=2.5m
