UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
47
5.3.6. Corner Wall geometry adjustment
Important note: When apply Corner Wall function, all the other geomtry alignment function will be
disabled. User can only execute geometry alignment through 8 points of Corner Wall adjustment. 4
corner control points can execute 4 corner alignment same as [2x2] geometry alingment function.
Edge Blend function will be still available.
Corner Wall alignment allows user to adjust the image at 90 degree corner wall. It can execute
horizontal and vertical corner wall alignment. User can only select either horizontal or vertical
alignment at one time. This function can co-exist with edge blending function but not warp function.
The image position can be adjusted as below:
➢
4 corner position of the image.
➢
The corner transition position of the image in horizontal or vertical direction.
➢
The maximum Corner position adjusting range is +_ 900 pixels and the curvature location
adjusting range is +_900 pixels.
➢
User can’t use ultra-short throw ratio projector for corner wall application. Otherwise, the image
distortion will be too big to be adjusted and may also create focus issue.
