UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
19
➢
Open web browser (Google Chrome, Edge or Internet Explorer) and input GeoBox IP address
(default is 192.168.0.100), user can see GeoBox WebGui and menu with virtual keys similar to
OSD for further system operation. There is no additional software is required.
➢
If user can’t connect the network, please power off/on GeoBox again to let PC detect UD100
network settings.
➢
User can set DHCP for the connection. If necessary, please [Renew] DHCP to get IP address
before network connection.
➢
PC Tool is another web tool for system setting and operation. It can also update Firmware or MCU
code. It can be downloaded from VNS website.
➢
Each GeoBox can set different IP address for independent operation and control from the same
PC.
➢
After get into Network setting OSD, please use < > OSD keys to select OSD menu items and use
˄ ˅ OSD keys to change IP address.
➢
If GeoBox is connected with WiFi Router (through LAN port), user can control GeoBox through
WiFi via PC, iPad or mobile phone.
➢
Default TCP server port is 1266.
2.8. Full screen and native aspect ratio in main input
➢
[Scaling] under [Image Properties] menu is to select the display mode either following signal
source original aspect ratio or full screen display
➢
For edge blending application, set to [Full Screen] mode is required. Otherwise, there will be
abnormal display in not full screen display input timing.
Crossover UTP cable
Crossover UTP cable
