UD100 User Guide Document: UD100-3
----------------------------------------------------------------------------------------------------------------------------- -----------
69
8.3. System connection
➢
Only the input signal from HDMI-1/4/7/10 input port can be looped out.
➢
Input signal can be connected to HDMI-1/4/7/10 input port and looped out to next
processing module or unit.
➢
If setup by IR remote controller, please install IR extender near screen for easy
access by remote controller. The maximum adjusting points is 17x9.
➢
User can setup GeoBox through Ethernet. Please use WebGui or PC tool for the setup.
PC Tool can implement geometry alignment up to 17x17 adjusting points.
➢
Select input port and set GeoBox output resolution to be the same as projector native
resolution.
8.4. Projector settings
➢
Please reset projector to default setting.
➢
Disable dynamic color and brilliant adjustment.
➢
Disable Auto Keystone function.
➢
To select a Display Mode with 2.2 gamma curve will reduce the color difference in
overlap area. If necessary, please choose a Display Mode with the best result.
➢
Use projector internal color adjusting function to adjustment the color variation
among projectors before implement edge blending.
➢
Install projectors at a place with image size that can cover required image area and
with minimized keystone to get the best video quality.
