Videonics MXPro, User Manual

Page: 59 / 170

51
Transitions Basic Transition Concepts
As you can see, you first set up the transition, then execute it. Nothing happens until
you use the
T-BAR or PLAY button to run the transition. So, you set everything up,
then run the transition at the precise moment you want it to occur. As soon as one
transition finishes, immediately set up the next one so that all you have to do is press
PLAY or use the T-BAR to proceed.
You can select the CURRENT source, the NEXT source, and the transition in any order,
and change them as many times as necessary before actually running the transition.
At the completion of the transition, the CURRENT and NEXT sources swap places —
that is, CURRENT becomes NEXT, and NEXT becomes CURRENT.
At this point, you can do one of the following:
• Leave the CURRENT and NEXT sources as they are and switch back and forth
between them; or,
• Select a new NEXT source and, optionally, a new transition, then repeat the
process.
CURRENT NEXT
NEXT CURRENT
Before
After