Videonics MXPro User Manual Download Page 30

Page: 30 / 170

Chapter 3

Videonics MX-Pro User Guide

Power Connector

The MXPro package contains the required Transformer and Power Cord for the unit.

WARNING!

Use only the power cord and transformer provided in the package. Do not use
this power cord and transformer with any other equipment. Failure to observe

these conditions can damage your equipment and void your warranty.

Procedure

To connect the power cord and transformer:

Connect the Female Plug on the Power Cord into the Male Socket on the Trans-
former.

Connect the Male Plug on the Power Cord to a suitable power outlet.

Connect the Power Adapter Plug on the Transformer cord into the Power connec-
tor on the MXPro rear panel.

Turn the MXPro Power Switch (located on the right side of the unit) to the ON
position.

Power

Adapter

Plug

Male
Plug

Male Socket

Female Plug

Transformer

Power Cord

Summary of Contents for MXPro











































































































































































Search results

Summary of Contents for MXPro

Reviews:

Related manuals for MXPro

Brands by name

Popular brands

Videonics MXPro, User Manual

Search results

Summary of Contents for MXPro

Reviews:

Related manuals for MXPro

Brands by name

Popular brands