Vicruns VD120 Series, Manual

Page: 105 / 174

VD120 Series Inverter User Manual Parameter Description
-
101
-
Set
value
Function Description
0 Running frequency 0~maximum output frequency
1 Set frequency 0~maximum output frequency
2 Output current 0~2 times of rated motor current
3 Output torque 0~2 times of rated motor voltage
4 Output power 0~2 times of rated power
5 Output voltage 0~1.2 times of inverter rated power
6 PULSE input 0.01kHz~100.00kHz (100% corresponding 100.0kHz)
7 AI1 0V~10V
8 Reserved Reserved
9 Reserved Reserved
10 Length 0~maximum set length
11 Count value 0~Max count value
12 Communication setting 0.0%~100.0%
13 Motor rotate speed 0~maximum output frequency corresponding rotate speed
14 Output current 100% corresponding 1000.0A
15 Output voltage 0.0V~1000.0V (100% corresponding 100.0kHz)
F6-15
HDO1 Output Max
Frequency
0.01kHz~100.00kHz 50.00kHz
○
When selecting HDO1 terminals as pulse output, the function code is used to select the maximum
frequency value of the output pulse.
F6-16
AO1 Output Voltage
Lower Limit
0.00V~10.00V 0.00V
○
F6-17
Corresponding Setting
Value of AO1 Output
Voltage Lower Limit
0.0%~F6-19 0.0%
○
F6-18
AO1 Output Voltage
Upper Limit
0.00V~10.00V 10.00V
○
F6-19
Corresponding Setting
Value of AO1 Output
Voltage Upper Limit
F6-17~100.0% 100.0%
○
F6-20 AO1 Output Filter Time 0.00s~10.00s 0.00s
○
The function code used to set the relation of analog output voltage and its representing set value.
When AO1 output is the current output, 1mA current is equal to 0.5V voltage, so 20mA current equal
to10V (AO1 jumper wire to the current file).