background image

EF4500iSE Remote control kit

INSTALLATION AND OPERATION MANUAL

Congratulations on your purchase of your new Yamaha.
This manual will provide you with a good basic understanding of the operation and installation of this 
product. 
If you have any questions regarding the installation or operation of your machine, please consult a Yamaha 
dealer.

Particularly important information is distinguished in this manual by the following notations.

w

8

 This kit can be used for wireless remote control of Yamaha's EF4500iSE Generator only. Do not 

use this product for any other purposes.

8

 

Before using the remote control kit, carefully read and understand this manual, the generator's 
owner's manual and warning labels attached to the generator. Also, become familiar with the 
generator operations, safety information and important information.

8

 

Keep this manual together with the generator's owner's manual, and use them if you have any 
questions or problems during operation. If you resell or transfer your generator to another person, 
remember to attach this manual to it.

c

C

Do not use this product in other countries, as doing so may be illegal.

NOTE:

8

 The remote control can be used approximately 20 meters away from the generator if there are no 

obstacles between them.

8

 This communication distance depends on the ambient environment and the situation in which you use 

the remote control. The communication distance becomes shorter if there are any obstacles between 
you and the generator. Also, if you use the remote control near the radio transmitter facility, the radio 
communication distance may be reduced greatly or the communication itself may fail.

8

 If the remote control has a delay in responding or it does not respond at all, the service life of the cells 

of remote control may have expired, or the generator battery may have discharged. Replace dry cell 
batteries of the remote control, or recharge the generator battery.

7XF-2819W-10

Q

The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS 
INVOLVED!

w

Failure to follow WARNING instructions could result in severe injury or death to the 
engine operator, a bystander or a person inspecting or repairing the engine.

c

C

A CAUTION indicates special precautions that must be taken to avoid damage to the 
engine.

NOTE:

A NOTE provides key information to make procedures easier or clearer.

7XF-2819W-10̲0409.indd   1

7XF-2819W-10̲0409.indd   1

2008/04/10   9:17:32

2008/04/10   9:17:32

Summary of Contents for EF4500iSE - Inverter Generator











Reviews: