Vicruns VD120 Series, Manual

Page: 138 / 174

Parameter Description VD120 Series Inverter User Manual
-
134
-
FF-05 Fast Debugging Setting
Unit’s digit: user custom parameter
group display selection
0: Not display
1: Display
Ten’s digit: user change parameter group
display selection
0: Not display
1: Display
0x10
○
When F7-00 selection for 5 (fast debugging) function, to set open or close the JOG/REV key by FF-05
can switch of three kinds of parameters display.
Name Description
Function parameter
mode Order display function parameters and the frequency converter with F0 ~ FF,
A0 ~ A4, b0 ~ b3, U0 function parameter set.
Custom parameters
Custom display function of the individual parameters (up to customize 32), the
user need to display the function of the parameters were identified through the
b0 group.
User change
parameters mode
Different with the factory parameter function parameters.
When the fast debugging is effective, this time can through the JOG/REV key switch into a different
parameter display mode, the default value for the function parameter mode display, the default can be
switched to the users to change the parameter mode display.
Function display mode Display
Function parameter display
Custom parameters display
User change parameters display
The display code of display mode of each parameters is:
VD120 inverter provides two groups of personality parameters display mode: the user to customize
the parameters, the user to change the parameter.
User customization parameters group is set up to the parameter of b0 group, the maximum can
selection 32 parameters, these parameters can be summarized together, and can be easy to debug.
Under customization parameter mode, default add a symbol of u before the user’s custom function
code.
For example: F0-01, in the user customization parameters, the display effect is uF0-01.
The user changes the parameters of the user to change the parameters that are different from the
factory value. The user change parameter group is good for the customer to check the parameter
summary of changes, and it is convenient for find problems at scene.
Users change the parameters, default add a symbol c before the user’s custom function code.
For example F7-00, in the user to change the parameters, display effect is cF7-00.
FF-06 Product Code 0~65535
Factory
Setting
●
FF-07 Software Versioning 1.00~10.00
Factory
Setting
●
FF-08 Inverter Model
Factory
Setting
●
FF-09
Date of Production
(Year/Month)
0~9999
Factory
Setting
●