4 .
Press and hold the Shift
key and then press the F4 key. The VCR Control screen will display on the
system console.
5 .
Enter the unit number for the VCR connected to the
on which you initiated recording
(applicable only for multi-VCR systems) and press the Unit soft key.
6 .
Press the Record soft key on the VCR Control screen.
7 .
Press and hold the Shift
key and then press F3 to return to the
screen. Press the Monitor key
to exit the
menus.
Playing Back Video
To play back video:
1 .
Press the Mode soft key. The Mode key and the Format key share a label. Press the Shift
key to
toggle to the Mode label if necessary.
2 .
The Mode Select menu will display on the multipicture display monitor.
3 .
Use the joystick or press the
key to select “Decode
Play>“.
4 .
Press the Enter soft key.
5 .
Press and hold the Shift
key and then press the F4 key. The VCR Control screen will display on the
system console.
6 .
Enter the unit number for the VCR connected to the
on which you initiated recording
(applicable only for multi-VCR systems) and press the Unit soft key.
7 .
Rewind the tape if necessary and press the Play soft key on the VCR Control screen.
8 .
Press and hold the Shift
key and then press F3 to return to the
screen. Press the Monitor key
to exit the
menus.
Sequencing Video
Video will sequence or remain steady as defined in the
programming menus for each screen
display format. If you want video to sequence, it must be defined in the
software to do so.
Video that is sequencing in full screen display format may be paused as follows:
Enter the camera number.
2 .
Press the Camera key to pause video currently sequencing on the monitor.
Quick Setup Screens
Press Setup during play back to display the Quick Decode Setup screen on the multipicture display monitor.
For simplex units, display the Quick Encode Setup screen by pressing Setup during recording.
X923 Rev 1099 System Console
Operation:
43