Logging Off
To log off, hold the Shift
key and press the Camera key.
Changing Your
A manager can change the passcodes for all users, including the
for the manager ID. A
standard user can only change his own passcode. To do so, perform the following steps.
Enter the Main Setup screen by holding the Shift
key down while pressing the F5 key.
2 .
Press the Keypad soft key.
3 .
If you are a manager, use the up/down arrow soft key to select Set Passcodes from the Select Keypad
Function screen.
4 .
Type the new
and press Enter. Confirm the new passcode, press Enter and then press Exit.
Removing Passcodes
Any user may remove his own
by pressing Enter at the
prompt. A manager may
remove all passcodes.
To remove all passcodes, perform these steps:
Press and hold the Shift
key and then press F5 to display the Main Setup screen.
2 .
Press the Keypad soft key.
3 .
Use the up/down arrow soft key to select Set Passcodes from the Select Keypad Function screen.
4 .
Press the Remove Passcodes key and then select the Yes soft key. Press Exit.
Defining Auto
Time
Managers may define automatic
You will be logged out if the time passes without console activity.
Press and hold the Shift
key and then press the F5 key to display the Main Setup screen.
2 .
Press the Keypad soft key. The Select Keypad Function screen will display.
3 .
Use the up/down arrow soft key to select Set
from the Select Keypad Function screen.
Enter a value between 0 and 64 for
minutes followed by the ENTER key
or press EXIT to cancel and terminate.
NOTE: 0 value is
DISABLED.
Enter Auto-Logout Value:
current Auto-Logout value is 0.
4 .
Enter the time in minutes and press Enter. Use a value of
to disable this feature. Press Exit to
return.
18
l
Passcodes User
X923 Rev 1099 System Console