System Settings
Note: Only managers may access these settings.
I
Selecting the Mode
Press and hold the Shift
key and then press the F5 key to display the Main Setup screen.
2 .
Then press the System soft key. The Select System Category screen will display.
Use the arrow keys to change selection
followed
the ENTER key or press EXIT
to return to the previous
Select System Category
NOVA CONFIGURATION
VCR CONFIGURATION
CONFIGURATION
INSTALL DEFAULTS
3. Choose Mode Selection to display the Select System Mode screen. As discussed in the installation
sections,
standalone and AURORA/VCR ONLY systems do not include a control system.
NOVA/AURORA/VCR and
systems are identified by the number of control
systems;
systems contain more than one control system and include the
Multi-System Selector. Select the appropriate mode for your system and press the Enter
soft key to return to the Select System Category screen.
Use the arrow keys to change selection
followed by the ENTER key or press EXIT
to return to the previous screen.
Select System Mode
STANDALONE
NOVAIAURORAIVCR
AURORA/VCR ONLY
X923 Rev 1099 System Console
System Settings
l
25
