FCC Notice
Note: Complies with Federal Communications Commission Rules Regulations Part 15, Subpart for a
Class A
device.
WARNING
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in
strict accordance with the manufacturer’s instruction, may cause interference to radio and television reception.
It has been type tested and found to comply with the limits for a Class A computing device in accordance with
the specification in subpart B of part 15 of the FCC rules, which are designed to provide reasonable protection
against such interference in a commercial installation. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause interference to radio and television reception,
which can be determined by turning equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
Reorient the receiving antenna.
.
Relocate the equipment with respect to the receiver.
.
Relocated the equipment away from the receiver.
.
Plug the equipment into a different electrical outlet so that the equipment and receiver
are on different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional
suggestions.
The user may find the following booklet prepared by the Federal Communications Commission helpful:
“Interference Handbook, Bulletin CIB-2”
This booklet is available from the U.S. Government Printing Office, Superintendent of Documents,
SSOP, Washington, D.C.
O-l 6-045542-l.
Warning: Power must be removed from this unit before removing circuit modules or ribbon cables.
I
A
Caution: This unit contains circuit cards with integrated circuit devices that can be damaged by static
Take all
orecautions to
static
I