Use the arrow keys to change selection
followed by the ENTER key or press EXIT
to return to the previous screen.
Select RS422 Baud Rate
4800 BPS
UPS
19200 BPS
Note: In standalone mode, the RS-485 baud rate must be set to 4800 bps. When using
Output Interfaces, the RS-485 baud rate must be set to 9600 bps (you may use
in
ONLY, NOVA/AURORA/VCR or
systems) . This is the
default setting.
4 .
For
communication settings include handshake control, stop bits, parity and baud rate. You
will make these selections from the following screen. Press the Enter soft key on each line and make
the appropriate selection for your
device. The settings you choose here and the settings at
your
device must agree.
Use the arrow keys to change selection
by the ENTER
or press EXIT
to return to the previous screen.
Select RS232 Category
STOP BITS
HANDSHAKE CONTROL
5 .
When all settings have been completed, press the Exit key.
24
l
Communication Settings
X923 Rev 1099 System Console
