Vertical WAVE IP 2500, Installation Manual

Page: 28 / 236

Installation roadmap 2
-
2
Chapter 2: Before You Begin
Wave Server Installation Guide
4
Configure and connect the administrator PC
. Tasks include
configuring TCP/IP on the PC that you will use to administer
Wave ISM, connecting to the Wave ISM via your LAN or a
modem, installing client caching to improve performance, and
verifying installed hardware components.
Chapter 5
5 For new Wave ISM systems only:
Configure your system via the
Installation Wizard
. If you are upgrading an existing system, you
cannot use the Installation Wizard
Chapter 6
6
Set up the Wave Server for initial configuration
. Tasks include
obtaining and applying all required HotFixes; identifying the
Wave Server on your LAN; power-cycling the Wave Server;
setting the dial-in default IP address pool; performing basic system
configuration tasks, including entering information about your
system, setting the system date and time, and configuring the time
service used by Wave ISM; and adding Wave ISM user and
administrator accounts.
Chapter 7
7
Enter and activate your Wave licenses
to enable full system
functionality.
Chapter 8
8
Optionally, install ViewPoint and other Wave workstation
applications
on the PCs of users who need to run them: ViewPoint,
TAPI Service Provider, Contact Manager Assistant, and Archived
Recording Browser. (See Appendix A if you plan to install the
workstation applications on an applications server running on
Microsoft Terminal Services or Citrix® MetaFrame.)
Chapter 9
9
Optionally, install the Wave Recording Archive Service
to allow
users to search for and manage archived recordings using the
Wave Archived Recording Browser.
Chapter 10
10 Optionally, configure the Windows firewall for the Wave
workstation applications
. If you installed the Wave workstation
applications or Wave Recording Archive service, this appendix applies to
you.
Appendix E
Step Description See
Release 4.0 June 20, 2013