Vertical WAVE IP 2500, Installation Manual

Page: 105 / 236

Connecting to the Wave ISM 5
-
11
Chapter 5: Connecting to the Wave ISM from the administrator PC
Wave Server Installation Guide
•
Local connection:
A modem connection made through an analog station port on the
Wave Server. Although less useful than a remote connection, a local modem connection
can be made through any analog station port on the Wave Server. The default Wave
modem extension is 570.
Important: Before proceeding, install the modem on the administrator PC according to the
manufacturer’s documentation.
Note: The procedures in this section describe the steps to perform on an administrator PC
running Windows XP. The steps may be different on a PC running another Windows operating
system.
To configure the client modem on the administrator PC:
1. On the administrator PC, in the Windows Control Panel choose
Network Connections >
Create a new connection
. When the New Connection Wizard starts, click
Next
to
continue.
2. In the Network Connection Type screen, select
Connect to the network at my workplace
,
and then click
Next
.
3. In the Network Connection screen, select
Dial-up connection
and then click
Next
.
4. In the Connection Name screen, enter a
Name
for the connection, for example, Wave
Modem Connection. Click
Next
to continue.
5. If you have another device (besides the client modem) connected to the administrator PC,
in the Select a Device screen, select the checkbox for the modem that you added. Click
Next
to continue.
6. In the Phone Number to Dial screen, enter the
Phone number
:
• For a remote connection, enter the 7 or 10 digit phone number that will ring the
desired trunk.
• For a local connection, enter the extension number for the Wave modem (the default
is 570).
Click
Next
to continue.
7. In the Connection Availability screen, specify whether this connection will be available
to all users or just to yourself. Choose
Anyone's use
or
My use only
, depending on your
security requirements. Click
Next
to continue.
8. In the final screen, click
Finish
. The Connect dialog opens automatically after a few
moments. Go to the next section.
Release 4.0 June 20, 2013