Vertical WAVE IP 2500, Installation Manual

Page: 141 / 236

Verifying installed hardware components 7
-
29
Chapter 7: Initial Configuration
Wave Server Installation Guide
The following is an example of the Chassis View on a Wave IP 2500:
2. Verify that all of the modules and cards that you installed are visible in the graphical
representation of your Wave Server at the left of the window. You can do the following in
Chassis View:
• Position the cursor on a module or card on the left side of the window to display an
expanded version of it, along with statistics for that module or card, on the right side
of the window.
• Click a module or card on the left side of the window to open the configuration
applet for that card or module.
• Click
Periodic polling
to automatically update the status LEDs periodically. Set the
update interval (in seconds), and then click
Apply
.
• Click
Refresh on demand
to update the status LEDs whenever you click
Refresh
Now
.
• Click
System Info
to display advanced information about the Wave Server.
Release 4.0 June 20, 2013