Using the Wave Workstation Applications Setup
9
-
9
Chapter 9: Installing ViewPoint and Other Wave Workstation Applications
Wave Server Installation Guide
10.
Enter the Wave Server
Host Name
and the
Station ID
of the phone that will be used by the
person at this PC. The station ID is assigned to a phone automatically by Wave ISM. To
hear the station ID, pick up the phone and dial *00.
Important:
If there is no Wave phone near this PC, or you have not yet assigned a phone
to the user at this PC, you can enter any value (except 0 or another user’s station ID) to
continue.
Click
Next
to continue.
11.
In the next screen, select the
User Name
of the person assigned to this station ID from the
drop-down list, and enter the user’s
Password
.
If the person at this PC will be using GoldMine contact management software, clear the
Application can hang up calls
checkbox.
Click
Finish
to continue.
12.
A TSP Configuration Wizard dialog opens, warning you to close any TAPI applications
(for example Outlook or Wave Contact Manager Assistant) that are running. Close the
applications, and then click
OK
to continue.
13.
If you are installing the TAPI Service Provider for the first time, Workstation
Applications Setup prompts you to define a Windows telephony dialing location for your
PC, which is required to place outbound calls. If you see this prompt, click
OK
.
•
In the Location Information dialog, select your country from the drop-down list,
enter your area code, and enter the number you must dial to get an outside line, for
example “9”. Click
OK
.
•
In the Phone and Modem Options dialog, select the location from which you are
dialing, and click
OK
.
14.
In the Install Completed screen, click
Finish
to complete the installation.
Release 4.0
June 20, 2013
Summary of Contents for WAVE IP 2500
