MNL000423.doc
Revision 01
09/18/2018
© Versum Materials, Inc. as of the revision and date shown. All rights reserved.
Confidential and Proprietary Data
Page
-
34
In the above screen, the “2” represents the number of alarms currently active.
A L A R M
N A M E
Pressing the arrow down key will scroll through the list of existing alarms. After the last
alarm has been displayed, the CLEAR ALARM screen will prompt the user to press the
red X to exit the alarm screen or the green check mark to clear all current alarms.
Clearing alarms in this screen means acknowledging them. If the individual alarms still
exist, the alarm status may or may not allow the processor to start controlling
temperature depending on the interlock status or alarm type. However, the alarm will
be cleared from the display for approximately 5 seconds. If the alarm condition no
longer exists, the system will operate normally, otherwise the alarm message will
reappear.
C L E A R
A L A R M S
X = E X I
T
√ = E X E C U T E
Press the red “X” to return to the previous screen.
5.6.5
Password Screen
From the main screen, the user may view the password screen by pressing the Up
arrow for more than 5 seconds. The following screen will be displayed.
P A S S W O R D
S C R E E N
X = E X I T
√ = E X E C U T E
Pressing the green “√” key in the center of the keypad prompts the user to enter the 4-
digit password. The user must use the up or down arrow keys to select the individual
digits of the password. The digits will briefly display before the * symbol returns. The
right and left arrow keys are used to move to the adjacent digit.
Once the password has been entered, press the green “√” key to validate the correct
password. The display will return to the main menu. The password is “1969”.
