6-36
VariQuest
®
Perfecta™ 3600STP
User’s Guide
Troubleshooting Scan and Copy Issues
Problem persists.
If the problem persists, analyze the following areas of the
diagnostic plot:
•
S
D, H and L (for three modules, 0-Left, 1-Middle, and 2-Right
and its intersection)
If you see any of these defects in the studied areas, contact your
VariQuest dealer and report a “line discontinuities” error after
calibration.
The four vertical thin black lines at the beginning and end of the
diagnostic plot show, approximately, the position of the intersection
between scan bars, where this kind of error usually appears. If the
error appears outside these areas, contact your VariQuest dealer
and report a “line discontinuities within a scan bar”.
Light colored area fills are
missing in the scan or copy.
When scanning or copying a map with a light area at the top, the
Background color removal
setting could interpret it as a
background color, therefore removing it and other similar areas.
The example below shows the original image on the left and the
scanned image on the right.
1. Repeat the scan or copy with
Background color removal
set to
Off
, or if copying, select
Image
Settings Available” on page 4-21
and
2.
If the problem persists, clean and calibrate the scanner as
indicated in
“Clean the Scan Bars” on page 5-16
and
3. Repeat again with
Background color removal
set to
Off
.
Copy and Scan Quality Issues
(Continued)
Problem
Suggested Action
