manualshive.com logo in svg

Valco baby VENTRA PRO VPR-016-001, Installation & Operation Manual

The Valco baby VENTRA PRO VPR-016-001 is a top-notch stroller designed to make parenting a breeze. Ensure hassle-free usage with our comprehensive Installation & Operation Manual, available for free download from manualshive.com. This manual is an invaluable resource that guides you through the setup and operation of this exceptional product.

Share
Download
background image

63

® 2018 Valco Companies, Inc.

The controller makes many decisions based on temperature. The Temperature Control Settings menu allows you to 

input preferences for temperature-related decisions. Be sure to complete these menu items before setting up 

 

specific devices (fans, heaters, etc.). The information entered here, especially temperature setpoint, impacts most 

installed devices.

You should determine what your temperature setpoint will be before inputting or editing 

individual temperature settings for control devices.

This is your target building temperature. The controller calculates the on and off temperatures for devices based on 

the current temperature setpoint. 

Changing the Setpoint will cause the following values to change: 

TEMPERATURE CONTROL SETTING                                                                                Z1-S02   

Temp Setpoint:            71.0                                                                             (Ramping ON)

Actual or effective temperature, or a blend of the two, can be used to control the building environment. This is called 

the working temperature. The controller uses the 

working

 temperature to determine when to turn devices on and 

off. The Temp Control can also be set to OFF.  

See NOTE below on what happens when “Temp Control” is set to 

OFF.

  

Effective

 takes into account the effect that air speed has on how comfortable the animal feels. 

Actual

 uses the actual 

air temperature only. 

When setting the temperature control, use the PLUS or MINUS keys to move the asterisk (*) right 

or left, or to select the OFF mode (the asterisk is replaced by the word OFF). Moving the asterisk 

to the right increases the amount of effective temperature used to calculate the working tem

-

perature. If you are not using an air speed/temp sensor such as Air Sensor Model 935, move the 

asterisk fully toward Actual.

TEMPERATURE CONTROL SETTING                                                                                Z1-S02   

Temp Control: Actual    *---------- Eff.

The OFF mode causes the controller to turn off all temperature controlled output devices 

and disable the normal alarms. Changing Temp Control to OFF also sets the Beginning Head 

Count (Current Animal Information menu) to zero in addition; turns off all output channels, 

so no fans, inlets, etc. will work.  The controller still continues to read inputs and store 

history. This mode is designed to conserve energy costs when the building is empty.

CONTROL 

SETTINGS

CONTROL 

SETTINGS

 

Temperature Control Settings Menu

Temperature Setpoint

Controlling Building Temperature: Actual or Effective

•  Temperature Control Settings 

•  Purge and Minimum Vent Settings 

•  Sound Alarm When settings

•  Fixed Fans; Stir, Sidewall, Tunnel, Ridge, Pit

•  Variable Fans; Stir, Side, Tunnel, Ridge, Pit

•  Heater Settings; Brooder, Furnace, Heater

•  Mister Settings; In House Fogger, Cool Pad Low/High, Mister

•  Curtain Inlets 

•  Ridge Vents 

Set the Temp Setpoint manually or have the temperature ramping feature automatically adjust it every day at 

midnight. If the animal age is within the age settings in the temperature setpoint ramp table (explained later), 

ramping is ON. When ramping is ON, the setpoint may NOT be manually adjusted. Temperature settings for control 

devices (fans, heaters, etc.) automatically track along with temperature setpoint changes.

Summary of Contents for VENTRA PRO VPR-016-001

































































































































































































































Reviews:

No comments

Related manuals for VENTRA PRO VPR-016-001

J4C 20 Mounting Instructions preview
20
Brand: J4C Pages: 4
ABB ACH550 series Quick Start Manual preview
ACH550 series
Brand: ABB Pages: 6
PIETRO FIORENTINI DELTAFLUX MT100 Technical Manual preview
DELTAFLUX MT100
Brand: PIETRO FIORENTINI Pages: 16
Parker 890 Series Quick Start Manual preview
890 Series
Brand: Parker Pages: 30
VAT 110 Series Installation, Operating, & Maintenance Instructions preview
110 Series
Brand: VAT Pages: 22
Febco Master Series Installation Instructions Manual preview
Master Series
Brand: Febco Pages: 12
Game ready 550450 User Manual preview
550450
Brand: Game ready Pages: 21
VAMP 259 Operation And Configuration Instructions preview
259
Brand: VAMP Pages: 304
Jands SafeGuard Installation Manual preview
SafeGuard
Brand: Jands Pages: 7
hager coviva Smartbox TKP100A Operation And Configuration Instructions preview
coviva Smartbox TKP100A
Brand: hager Pages: 34
Parker PSST8M23A Installation & Service Instructions Manual preview
PSST8M23A
Brand: Parker Pages: 8
Global Fire Equipment Junior V4 Operation & Maintenance Manual preview
Junior V4
Brand: Global Fire Equipment Pages: 23
KSB Monosub R Manual preview
Monosub R
Brand: KSB Pages: 16
SMA SB3.0-1SP-US-40 Technical Information preview
SB3.0-1SP-US-40
Brand: SMA Pages: 7
Vestil OLA-2-42 Instruction Manual preview
OLA-2-42
Brand: Vestil Pages: 8
e-survey P8II Quick Start Manual preview
P8II
Brand: e-survey Pages: 12
Fagor 8040 CNC - FEATURES Manual preview
8040 CNC - FEATURES
Brand: Fagor Pages: 247
CALEFFI 359 Series Manual preview
359 Series
Brand: CALEFFI Pages: 8

Brands by name

Popular brands

Load more brands