36
® 2018 Valco Companies, Inc.
Analog Output Board Installation, Wiring and Configuration
The purpose of the board is to provide analog output capability to the Ventra Pro whole house controller to
add variable Valve Gas heaters, brooders, variable lighting control as well as third party variable speed fan
control capability.
1. Mount the Board to the Bracket, 921445 using the screws that are included with the kit, as shown in Figure 1.
2. Cut the cable, 921513 and strip the jacket 1-1/2” (3.81 cm) and the wires 1/4” (.64 cm) at both ends, as shown in
Figure 2 below.
Strip wir
e jacke
t on both ends
(
the wire is a condensed view from actual length
).
