manualshive.com logo in svg

Valco baby VENTRA PRO VPR-016-001, Installation & Operation Manual

The Valco baby VENTRA PRO VPR-016-001 is a top-notch stroller designed to make parenting a breeze. Ensure hassle-free usage with our comprehensive Installation & Operation Manual, available for free download from manualshive.com. This manual is an invaluable resource that guides you through the setup and operation of this exceptional product.

Share
Download
background image

158

® 2018 Valco Companies, Inc.

Copying Parameter Sets - continued

14.  Press 

ENTER

 to continue.

15.  After the copy is created, you can either copy another parameter set or restart the controller.

              a)  To copy another parameter set, press 

ENTER 

and repeat the steps starting with step 7.

              b)  If you are done copying parameter sets, cycle the power on the controller to restart normal operations.

ENTER

PARAMETER COPY FINISHED!  Press ENTER 

to copy another Set or CYCLE THE POWER

Due to memory constraints and file sizes, only one Parameter set can be copied at a time. To copy all 

the parameter sets from one SD card to another, either repeat the steps above for each parameter 

set or use a computer with an SD card reader to copy all the files from one SD card to the other. 

If you receive a message stating "Cycle POWER to controller to continue...",  too much time elapsed 

before a key was pressed and the controller needs to be restarted.

StartUp Procedure Options:  COPY PARMS----

Cycle POWER to controller to continue....

Copying parameter sets does not change the current parameter set used to control the buildings 

environment.  See "Changing Parameter Sets" to load one of the newly copied parameters sets.

Creating NEW Parameter Sets

This option requires you to set up the Global parameters, install the input and output devices and set all the 

associated settings. This option changes the active parameter set to the one you create. The steps are:

1.  Make sure the current parameters are saved:

             a)  Press the 

CANCEL

 key three times.

             b)  Press the Down arrow key, to display the Revisions Date/Time screen.

             c)  Press the 

ENTER

 key (Writing PARAMETERS to Flash will be displayed).

2.  Restart the Controller

3.  Press the 

ENTER 

key when the screen displays "Press 

ENTER

 to change."

             a)  This screen only appears for a few seconds shortly after the controller starts.

StartUp Procedure Options:  

Press ENTER to Change!

4.   If an Options password has been entered, enter the 8-digit password to access the Startup Options  

           menus. See "Password for Parameter Set Options" on page 161

 

of this manual for more information.

StartUp Procedure Options:  SET PASSWORD

Enter Options Password:  0xxxxxxxx

ENTER

ENTER

*

Summary of Contents for VENTRA PRO VPR-016-001

































































































































































































































Reviews:

No comments

Related manuals for VENTRA PRO VPR-016-001

ABB Relion 670 series Applications Manual preview
Relion 670 series
Brand: ABB Pages: 760
ABB 650 series Engineering Manual preview
650 series
Brand: ABB Pages: 128
Waterway OASIS Instruction Manual preview
OASIS
Brand: Waterway Pages: 16
Ohsung Electronics B905-FTN-TA User Manual preview
B905-FTN-TA
Brand: Ohsung Electronics Pages: 18
1Control Solo Technical Sheet preview
Solo
Brand: 1Control Pages: 8
Caen V793 Technical Information Manual preview
V793
Brand: Caen Pages: 20
National Instruments NI USB-6008 Quick Manual preview
NI USB-6008
Brand: National Instruments Pages: 21
National Instruments PXIe-8238 Getting Started Manual preview
PXIe-8238
Brand: National Instruments Pages: 6
National Instruments NI PXI-7831R Where To Start preview
NI PXI-7831R
Brand: National Instruments Pages: 10
National Instruments PXI-8231 Installation Manual preview
PXI-8231
Brand: National Instruments Pages: 6
Watlow F4T Installation And Troubleshooting User’S Manual preview
F4T
Brand: Watlow Pages: 59
Watts Tekmar WiFi Snow Melting Control 670 Installation Manual preview
Tekmar WiFi Snow Melting Control 670
Brand: Watts Pages: 48
Zodiac SIROCCO2 Spare Parts/Accessories Instructions Manual preview
SIROCCO2
Brand: Zodiac Pages: 12
National Instruments 73 Series Getting Started preview
73 Series
Brand: National Instruments Pages: 34
National Instruments SCXI -1122 Calibration Procedure preview
SCXI -1122
Brand: National Instruments Pages: 17
Davey Torrium 2 TT45 Installation And Operating Instructions Manual preview
Torrium 2 TT45
Brand: Davey Pages: 12
Insignia NS-GPS4RC101 Quick Setup Manual preview
NS-GPS4RC101
Brand: Insignia Pages: 2
Measurement Computing CIO-DAS1401/12 User Manual preview
CIO-DAS1401/12
Brand: Measurement Computing Pages: 32

Brands by name

Popular brands

Load more brands