manualshive.com logo in svg

Valco baby VENTRA PRO VPR-016-001, Installation & Operation Manual

The Valco baby VENTRA PRO VPR-016-001 is a top-notch stroller designed to make parenting a breeze. Ensure hassle-free usage with our comprehensive Installation & Operation Manual, available for free download from manualshive.com. This manual is an invaluable resource that guides you through the setup and operation of this exceptional product.

Share
Download
background image

83

® 2018 Valco Companies, Inc.

Change Control Device

Press SYSTEM SETUP,  ENTER when viewing the CHANGE menu to change a device. 

 press 

PLUS

 or 

MINUS 

key to 

change values. If changing an Air Sensor, see pages 88 - 90 on the “Air Sensor Shared” devices.

System & Control Device Setup                                                                                      Z1-S02

Press ENTER to CHANGE a Control Device.

Changing channels for two-channel devices, such as curtains, requires both of the new output channels 

to be unused. To change a group/device number (#1 in the example above) you must DELETE the old 

device then ADD the new device.  This requires scrolling to the DELETE Control Device. 

This menu item allows you to change the assigned channel. If you want to change device-specific settings, go to the 

menu for that device (refer to the 

Viewing, Entering or Changing Equipment Operation Parameters section

). 

CHANGE: Air Sensor                                                                                                 # 1    Z1-S02

to Module 01     Channel 01                                              

Delete Control Device

System & Control Device Set-up Menu - continued

While in the System & Control Device Set-Up menu scroll to the DELETE menu and press ENTER to remove a device. 

If 

deleting an Air Sensor, see pages 88 - 90 dealing on “Air Sensor Shared” devices.

SYSTEM & CONTROL DEVICE SET-UP                                                                             Z1-S02 

Press ENTER to DELETE a Control Device.

You are prompted with a control device name to delete. Use the PLUS and MINUS keys to scroll through the available 

devices to delete. 

Deleting a device that has open/close capability will free two output channels. 

DELETE:Air Sensor                                                                                                  # 2   Z1-S02 

 to Module 01     Channel 01

DELETE:Air Sensor                                                                                                  # 2   Z1-S02

Press <****> to confirm deletion. 

Confirm the deletion by pressing the 

LEFT

 arrow, 

RIGHT

 arrow and ENTER keys all at the same time. 

If deleting an Air Sensor, 

see page 88 thru page 90

 dealing with the “Air Sensor Shared” devices also.

DELETE:Air Sensor                                                                                                  # 2   Z1-S02

DELETED!!!

Add Zone

Press ENTER when viewing the ADD New Zone menu to add a zone. You are prompted with the next available zone 

number and asked to press ENTER again to accept it.

SYSTEM & CONTROL DEVICE SET-UP                                                                           Z1-S02 

Press ENTER to ADD New Zone.
Next available unused Zone number is 2.

Press ENTER to accept this Zone number.

Attempting to add zone 10 will result in the error message below.

                                      ** All 9 Zone numbers are used **

                                            New Zone cannot be added.

ENTER

 

ENTER

+

ENTER

ENTER

 

ENTER

ENTER

ENTER

SYSTEM 

SETUP

 

SYSTEM 

SETUP

Summary of Contents for VENTRA PRO VPR-016-001

































































































































































































































Reviews:

No comments

Related manuals for VENTRA PRO VPR-016-001

Samson 3510 Mounting And Operating Instructions preview
3510
Brand: Samson Pages: 48
Mako Networks 6000 Series Quick Installation Manual preview
6000 Series
Brand: Mako Networks Pages: 15
YASKAWA P1000 Quick Start Manual preview
P1000
Brand: YASKAWA Pages: 256
J3C S20 Assembly Instructions preview
S20
Brand: J3C Pages: 2
Gardigo 80000 Instruction Manual preview
80000
Brand: Gardigo Pages: 8
Gardigo 60035 Instruction Manual preview
60035
Brand: Gardigo Pages: 19
Maguire Products GRAVIMETRIC AUGER FEEDER MGF-ST Instruction Manual preview
GRAVIMETRIC AUGER FEEDER MGF-ST
Brand: Maguire Products Pages: 47
Magtrol DSP7000 User Manual preview
DSP7000
Brand: Magtrol Pages: 160
RADVision Scopia XT1000 Quick Setup Manual preview
Scopia XT1000
Brand: RADVision Pages: 3
RADEMACHER 2696 Instruction Manual For The Electrical Connection And For Commissioning preview
2696
Brand: RADEMACHER Pages: 48
R&M STAGEMAKER SM1 Technical Manual preview
STAGEMAKER SM1
Brand: R&M Pages: 53
Tylo 2900 5208 Installation Manual And Quick Start Manual preview
2900 5208
Brand: Tylo Pages: 51
SYR 315.2 Instructions For Use preview
315.2
Brand: SYR Pages: 2
LCT HQ-TJ-901 Operation Manual preview
HQ-TJ-901
Brand: LCT Pages: 5
Woodward ProAct III Installation And Operation Manual preview
ProAct III
Brand: Woodward Pages: 32
G&D PersonalWorkplace Pro Video Installation Manual preview
PersonalWorkplace Pro Video
Brand: G&D Pages: 56
Beninca DA.93AM Operating Instructions Manual preview
DA.93AM
Brand: Beninca Pages: 16
Festo CPX-AP-I-8DI-M8-3P Translation Of The Original Instructions preview
CPX-AP-I-8DI-M8-3P
Brand: Festo Pages: 18

Brands by name

Popular brands

Load more brands