manualshive.com logo in svg

Valco baby VENTRA PRO VPR-016-001, Installation & Operation Manual

The Valco baby VENTRA PRO VPR-016-001 is a top-notch stroller designed to make parenting a breeze. Ensure hassle-free usage with our comprehensive Installation & Operation Manual, available for free download from manualshive.com. This manual is an invaluable resource that guides you through the setup and operation of this exceptional product.

Share
Download
background image

47

® 2018 Valco Companies, Inc.

When the controller is powered on, you will see the following sequence of operations.  These operations are 

automatic and you should not press any keys at this time.  This will take approximately 30 seconds.  
The following screens will only appear on the new HMI boards (white screen).

Ventra II HMI Bootloader                                                                               v 01.01.09

Compiled Mar 27 2018 @ 12:56:34

Ventra II HMI Bootloader                                                                                 v01.01.09

****************************************************************

Ventra II HMI Bootloader                                                                               v 01.01.09

Application loaded on 06/01/2018 @ 23:46

GLOBAL PARAMETERS SETUP 

Animal Type: Birds

When the controller has finished going through the sequence of operations 

shown above

 the following GLOBAL 

PARAMETERS SETUP display screen will appear.  Instructions for setting up the GLOBAL PARAMETERS SETUP 

submenus are on the next page. 

Control Power Up Sequence Completed

Press ENTER if you want to load and use a different parameter set than what you will be setting up as 

you continue through the “Setting Up the Control” instructions.   

More detail on parameter sets can be 

found beginning on page 158.

Starting application:   1.00.00.52  05/23/18

Ventra PRO APP  M1.00.00.52                                                                       0X9D036000

Check all connections before switching on your controller.  

Power Up Sequence

*

The following screens will appear on all Ventra Pro controllers. 

Checking Real Time Clock 

Correct operation clears message 

Start-Up Procedure 036                                                                                   11:47

Setup SD CARD operations

Start-Up Procedure Options Press 

ENTER to change.

Start-Up Procedure 036                                                                                  11:47

                                           Power Reset Slave Modules          (5 seconds)

Summary of Contents for VENTRA PRO VPR-016-001

































































































































































































































Reviews:

No comments

Related manuals for VENTRA PRO VPR-016-001

Garmin 340 Pilot'S Manual preview
340
Brand: Garmin Pages: 12
ECKELMANN VS 3010 BS Operating Instruction preview
VS 3010 BS
Brand: ECKELMANN Pages: 178
Maguire Products GRAVIMETRIC AUGER FEEDER MGF-ST Instruction Manual preview
GRAVIMETRIC AUGER FEEDER MGF-ST
Brand: Maguire Products Pages: 47
Magtrol DSP7000 User Manual preview
DSP7000
Brand: Magtrol Pages: 160
Idex Pulsafeeder MPC Vector Installation, Operation & Maintenance Manual preview
Pulsafeeder MPC Vector
Brand: Idex Pages: 114
M-system R1C-GH Instruction Manual preview
R1C-GH
Brand: M-system Pages: 13
SOMFY Situo 1 RTS Installation And Operating Manual preview
Situo 1 RTS
Brand: SOMFY Pages: 112
Technische Alternative UVR 63H Operation And Installation Manual preview
UVR 63H
Brand: Technische Alternative Pages: 68
Waeco MagicSpeed Series Installation And Operating Manual preview
MagicSpeed Series
Brand: Waeco Pages: 76
Brand Innovations BI-0316 Technical Manual preview
BI-0316
Brand: Brand Innovations Pages: 56
EFI E-42 Installation And Service Manual preview
E-42
Brand: EFI Pages: 127
maxxess eMAX-EP4502 Installation Manual preview
eMAX-EP4502
Brand: maxxess Pages: 11
SOLARJACK PVA 5-30 User Manual preview
PVA 5-30
Brand: SOLARJACK Pages: 14
National Instruments SCXI-1181K Installation Manual preview
SCXI-1181K
Brand: National Instruments Pages: 4
Planar Dome Md4/PCI Installation Manual preview
Dome Md4/PCI
Brand: Planar Pages: 162
THK TJU Instruction Manual preview
TJU
Brand: THK Pages: 134
Zepro Z 2500-130 Installation Instructions Manual preview
Z 2500-130
Brand: Zepro Pages: 64
Frequency Central MU System X Dual Amplifier Build Documentation preview
MU System X Dual Amplifier
Brand: Frequency Central Pages: 4

Brands by name

Popular brands

Load more brands