87
® 2018 Valco Companies, Inc.
Viewing, Entering or Changing Equipment Operating Parameters
Input operating parameters for the devices you have installed.
1. Go to the first menu screen in the Device/Equipment Settings menu (using the RIGHT or LEFT arrow keys) and
press ENTER to view the device settings.
2. Press the
LEFT
or
RIGHT
arrow key to scroll through the devices until you come to the device group you want
to change.
3. Press the
DOWN
arrow key until the device setting you want to change is displayed.
4. Press
ENTER
to enter the
EDIT
mode. A "_" cursor will appear under the first data field.
5. Use the
PLUS
or
MINUS
keys to change the value.
6. Press
ENTER
to accept the setting and move to the next data field if there is one.
The following pages provide details for inputting parameters for each type of device.
The sensor menu items are grouped in the controller’s Sensor Calibration & Setting menu. Refer to the accompanying
Menu Guide
for help in locating device menus and their menu items.
DEVICE / EQUIPMENT SETTINGS Z1-S01
PRESS ENTER TO VIEW SETTINGS
CONTROL
SETTINGS
ENTER
SYSTEM
SETUP
You may also press the “SYSTEM SETUP” Hot-Key to navigate to “DEVICE EQUIPMENT SETTINGS” menu.
Devices are either an Input Device or Output Device. To see a list of devices please refer to
Menu Guide in Appendix 23 beginning on page 216.
