Valco baby VENTRA PRO VPR-016-001 Installation & Operation Manual Download Page 137

Page: 137 / 224

137

® 2018 Valco Companies, Inc.

You can enter as many time slots per age as are available. There is no incremental ramping of the times between age

settings. The program uses the time slots with the oldest Age setting that is less than or equal to the current animal

age and uses those Age slots to control the lights. Example: In the images above, the controller will use time slot #1

from Age 5 to Age 9. At Age 10, the controller will use time slot #2.

You can enter the time slots in any order you want. Shortly after you enter the information, the controller will sort the

time slots from the earliest Age to the oldest Age.

Feeder Settings

30 time slots are provided to allow turning the Feeders on and off based on the age of the animals. To set the timer

slots, enter the age of the animals the time slot should be used for and then enter the times to turn on and off the

feeders. The on and off times use a 24-hour clock format. To set a feeder group for continuous on, set the ON time for

to 00:00 and the OFF time to 24:00. Press the UP and DOWN arrow keys to change the Setting number.

FEEDER GROUP #1 SETTING Z1-S01

Setting #

Age= ON=

OFF=

CONTROL

SETTINGS

DEVICE / EQUIPMENT SETTINGS

Z1-S01

PRESS ENTER TO VIEW SETTINGS

FEEDER GROUP #1 SETTING Z1-S01

Setting #

Age= ON=

OFF=

FEEDER GROUP #1 SETTING Z1-S01

Setting #

Age= ON=

OFF=

ENTER

Age, On Time and Off Time

Instant Run

The “Run For” feature provided the ability to immediately turn on the Feed system for the set amount of time. When

the time is set, the feed system will turn on, the timer will count down and when it reaches 0:00:00, the feed system

will return to normal operations based on the Feeder’s Age/On/Off schedules. This allows the ability to turn on the

feed system temporarily without having to worry about turning them off, such as when the feed in a bin hangs up, or

the bin runs out and you have to start a new one.

The amount of time the feed system runs, when this feature is enabled, is recorded in the Actual and

Calculated hourly history runtimes for the Feeder in the same way the runtimes are recorded for a

normal feed schedule.

CONTROL

SETTINGS

DEVICE / EQUIPMENT SETTINGS

Z1-S01

PRESS ENTER TO VIEW SETTINGS

FEEDER GROUP #1 SETTING Z1-S01

Run For 0:54:03

ENTER

Summary of Contents for VENTRA PRO VPR-016-001

































































































































































































































Search results

Summary of Contents for VENTRA PRO VPR-016-001

Reviews:

Related manuals for VENTRA PRO VPR-016-001

Brands by name

Popular brands

Valco baby VENTRA PRO VPR-016-001, Installation & Operation Manual

Search results

Summary of Contents for VENTRA PRO VPR-016-001

Reviews:

Related manuals for VENTRA PRO VPR-016-001

Brands by name

Popular brands