79
® 2018 Valco Companies, Inc.
SYSTEM & CONTROL DEVICE SET-UP Z1-S01
Time Set-Up: 12:24:21
SYSTEM & CONTROL DEVICE SET-UP Z1-S01
Date Set-Up: 11/23/2010
SYSTEM & CONTROL DEVICE SET-UP Z1-S01
Power Load Delay Time: 0:00
This menu allows you to enter basic information such as date, time and control devices.
press the
SYSTEM SETUP
hotkey.
Press ENTER to edit the current time (24-hour format) or the current date (month/
day/year format for American and day/month/year for Metric).
The controller does not update the clock for Daylight Savings Time because not all global areas
recognize this adjustment.
Press ENTER to edit the power up load delay time. Use the PLUS or MINUS key to change the minutes and seconds.
This prevents groups of fans and heaters from all starting at the same moment. Load delay time is designed to
reduce the peak demand power requirements for your buildings and reduce the electrical load capacity for backup
generators. The load delay time should be set just long enough to get a motor up to speed, about 2 to 5 seconds. The
load delay time is only used for the first five minutes after a controller is powered on.
System & Control Device Set-up Menu
SYSTEM
SETUP
SYSTEM
SETUP
You are now ready to set up all the devices!
Setting up the Control Software
Date and Time Setup
Power Up Load Delay Time
*
