UTT Technologies Chapter 6 Wireless
http://www.uttglobal.com
Page 79
Figure 6-1 Basic Wireless Settings - AP Mode
Enable Wireless:
It allows you to enable or disable wireless function. If you select
the check box to enable wireless function, wireless clients can connect to the
Wireless Router to access the Internet, commnuicate with each other via the Wireless
Router, and access the wired network connected to the Wireless Router. Else, the
Wireless Router accepts only wired computers and other wired network devices.
Operation Mode:
Here please select
AP Mode
.
SSID:
The SSID (Service Set Identification) is also known as the wireless network
name, which is used to uniquely identify a wireless network. It is case sensitive. It
must be identical for all wireless devices in the wireless network.
Wireless Mode:
It specifies the wireless standards running on your wireless network.
The options are
11g Only
,
11n Only
and
11b/g/n Mixed
.
●
11g Only:
In allows both 802.11g and 802.11n wireless clients to connect to the
Wireless Router at 802.11g data rates with a maximum speed of 54Mbps.
●
11n Only:
It only allows 802.11n wireless clients to connect to the Wireless
Router at 802.11n data rates with a maximum speed of 300Mbps.
●
11b/g/n Mixed:
It allows 802.11b, 802.11g and 802.11n wireless clients to
connect to the Wireless Router at their respective data rates. The maximum
speeds are 11Mbps, 54Mbps and 300Mbps respectively.
Channel:
It specifies the wireless channel used between the Wireless Router and
wireless clients. The valid range is 1 through 11. You can also select
Auto
to let the
