UTT HiPER 518W Advanced Configuration Manual Download Page 178

Page: 178 / 295

UTT Technologies Chapter 9 Application

Control

http://www.uttglobal.com

Page 170

9.7

Policy Database

This section describes

Application Control > Policy Database

page.

In this page, you can not only view the policies in

Policy Database List

, but also update

them online.

The Device currently provides eleven types of policies, including: Email, IM,

P2P, Stock, Network Video, Online Game, Shopping Site, SNS, Web Game, Forum and

Others. These policies

are referenced by Internet Application management function (set in

Application Control > Application Control

page).

Figure 9-14 Policy Database List

Name:

Shows the name of the policy.

Type:

Shows the type of the policy.

Description:

Shows the description of the policy. It is usually used to describe the

purpose of the policy.

Update:

Click to update the policy over the Internet.

Update All:

Click to update all policies in the list over the Internet.

Summary of Contents for HiPER 518W








































































































































































































































































































Search results

Summary of Contents for HiPER 518W

Reviews:

Related manuals for HiPER 518W

Brands by name

Popular brands

UTT HiPER 518W, Advanced Configuration Manual

Search results

Summary of Contents for HiPER 518W

Reviews:

Related manuals for HiPER 518W

Brands by name

Popular brands