UTT Technologies Chapter 6 Wireless
http://www.uttglobal.com
Page 87
6.1.3.3 Lazy Mode
If you want the Wireless Router to operate in lazy mode, please select
Lazy Mode
from
the
Opeartion
Mode
drop-down list, see Figure 6-9. In this mode, the Wireless Router
can connect to other wireless network devices in bridge mode or repearter mode; and at
the same time it can provide connectivity for wilreless clients.
Figure 6-9 Basic Wireless Settings - Lazy Mode
Operation Mode:
Here please select
Laze Mode
.
The other paramters are the same as those of
Repeater Mode
.
Please refer to
Section 6.1.3.1 Repeater Mode
for detailed information.
6.1.4 Configuration Example for WDS
1. Requirements
In this example (see Figure 6-10), there are two Wireless Routers: Router A and Router B.
The Wireless Router A operates in Bridge Mode, its SSID is UTT123, security mode is
TKIP, pre-shared key is 123456789 and LAN IP address is 192.168.1.1/25. The Wireless
Router B
’s IP address is 192.168.1.2/25. We want the two Routers to communicate with
