UTT Technologies Chapter 3 Quick Setup
http://www.uttglobal.com
Page 33
Skip:
Click to go directly to the next page of the
Setup Wizard
. The changes made
on the current page will be discarded.
Next:
Click to go to the next page of the
Setup Wizard
.
3.3.4 Setup Wizard - Wireless Settings
In this page, you can configure basic wireless settings of the Wireless Router.
Figure 3-14 Setup Wizard - Wireless Settings
SSID:
The SSID (Service Set Identification) is also known as the wireless network
name, which is used to uniquely identify a wireless network. It must be between 1 and
32 characters long, and it is case sensitive.
Wireless Mode:
It specifies the wireless standards running on your wireless network.
The options are
11g Only
,
11n Only
and
11b/g/n Mixed
.
●
11g Only:
In allows both 802.11g and 802.11n wireless clients to connect to the
Wireless Router at 802.11g data rates with a maximum speed of 54Mbps.
●
11n Only:
It only allows 802.11n wireless clients to connect to the Wireless
Router at 802.11n data rates with a maximum speed of 300Mbps.
●
11b/g/n Mixed:
It allows 802.11b, 802.11g and 802.11n wireless clients to
connect to the Wireless Router at their respective data rates. The maximum
speeds are 11Mbps, 54Mbps and 300Mbps respectively.
Channel:
It specifies the wireless channel used between the Wireless Router and
wireless clients. The valid range is 1 through 11. You can also select
Auto
to let the
Wireless Router automatically select the best channel. If there are multiple wireless
routers in your area, please make sure that their channels don
’t interfere with each
other.
